Multi-functional mixer is a combined multi-functional machine. Its main purpose is to process food. To process different foods, you only need to exchange different knife nets, knife holders and cups. After the use is installed, the fruits and vegetables to be squeezed need to be washed, peeled, and pitted, cut into small pieces, and cut into a size that can be put into the feeding mouth. Then you need to fasten the safety buckle of the machine, plug in the power, press the power button, start the machine, put the vegetables or fruits cut in advance into the trough slowly, and at the same time press the pine with a push rod Slowly push the inside of the machine so that vegetable or fruit juices flow out.
The multi-functional blender is used as a pulper. First, the host and the cup holder need to be connected, and then the jam cup and the knife holder must be screwed tightly. In the future, you need to open the lid and put the vegetables or fruits you want to stir into the cup. Inside, be sure to wash the vegetables or fruits before cutting into pieces, then add an appropriate amount of cold water, and then cover the cup. Finally, you need to place the conjoined knife holder and cup on the machine base. Here you must pay attention to the machine must be flat and screwed tightly, then the safety buckle is fastened, and then the power is turned on, so that it can be stirred into jam. If you want to make soy milk, you need to install a filter. After that, put the soaked soy beans into the cup from the feeding port in the center of the lid, add a certain amount of water, cover the lid, and turn on the power. It can run normally, the filter can filter out the residue of soybean milk, so that the taste of soybean milk is excellent.
ENGLISH
简体中文
