The main part of the belt juicer consists of a frame, an upper and lower drive shaft, a deceleration drive assembly, a filter belt, a cleaning belt component, a feeding component, a cloth device, a tensioning device, a correction device, a pressure boosting device, and a safety protection device. , Gas and electricity control device, washing water filter device and other components. Ancillary equipment consists of water filtration device (including curved mesh filter, water storage tank), stainless steel vertical multi-stage pump, spray water washing backflow pump, etc. The refined raw materials (solid-liquid mixture) are continuously pumped into the feeding hopper by the screw pump during the operation of the belt juicer (the bandwidth of the material can be adjusted), and is evenly distributed by the distribution roller.
In the belt-shaped juicer, a large amount of water is slowly squeezed out in the wedge-shaped area bent down to form a squeezeable filter cake. In the squeeze area, a pressure roller with an "L" type bead presses out the water, and Make sure the water quickly overflows from both sides. After the belt juicer, the diameter of the pressing roller is gradually reduced, and the filter belt is "S", which generates a shearing force of decreasing surface pressure to ensure the best dehydration effect. In order to further increase the dehydration rate, adding another one can produce linearity. Pressure and peripheral pressure. After dehydration, the filter cake is scraped off by a wear-resistant scraper.
Both filter belts of the belt juicer are continuously flushed by high-pressure nozzles, so that the filter belts maintain a high juice yield. The spray washing water is automatically filtered, slag-discharged, and recycled by the arc filter through the return pump, which saves energy. The filter press belt is woven from nylon warp and weft. It has the characteristics of acid and alkali resistance, food hygiene, easy juice, no water absorption, high strength and so on. When the belt juicer is working, it uses the airbag to tighten the filter belt and the special valve to control the deviation of the belt, which not only stabilizes and avoids overload, is safe and reliable, and realizes automation of the entire process.
ENGLISH
简体中文
