The application of belt juicers is the general trend

The belt-type juicer has been carefully developed and is an efficient extraction device. It is a key device related to the rate of juice production in the production of fruit juice and vegetable juice. It can be widely used in the juice industry of berries, nuts and various vegetables.
The belt-type juicer adopts multi-level folding stick pressure and multi-level pneumatic roller pressure, which has large pressing force and high juice output rate. At the same time, it also has the characteristics of energy saving, high degree of automation, automatic feeding and discharging, continuous work, strong versatility, sufficient pressure filtration, low water filtration of the filter cake, and convenient operation and maintenance. It is a high juice extraction equipment. Using such a belt-type juicer can increase the juice extraction rate by 20 to 35%, and the juice extraction rate can be as high as 75 to 80% (depending on the raw materials), which can greatly reduce production costs and improve the economic benefits of the enterprise.
The belt juicer can also be used for the pressure filtration and dehydration of some powders and slurries in the food, chemical, environmental protection, light industry and other industries. It adopts multi-stage folding stick pressure and multi-stage pneumatic roller pressure, which has a large pressing force. The juice yield is high. At the same time, it also has the characteristics of energy saving, high degree of automation, automatic feeding and discharging, continuous work, strong versatility, sufficient pressure filtration, low water filtration of the filter cake, and convenient operation and maintenance. It is a high juice extraction equipment. The use of a belt-type juicer can increase the juice extraction rate by 20 to 35%, and the juice extraction rate can be as high as 75 to 78% (depending on the raw materials), which can greatly reduce production costs and improve the economic benefits of the enterprise. This equipment can also be used for pressure filtration and dehydration of some powders and slurries in food, chemical, environmental protection, light industry and other industries.
The main part of the belt juicer is composed of the frame, the upper and lower drive shafts, the deceleration drive assembly, the pressure filter belt, the cleaning belt component, the feed component, the cloth device, the tension device, the belt correction component, the booster device, and the safety protection device , Gas and electricity control device, washing water filter device, etc. The supporting equipment is composed of a water filtration device (including a curved mesh filter, a water storage tank), a stainless steel vertical multistage pump, a spray washing water return pump, etc. The refined raw materials (solid-liquid mixture) are continuously pumped into the feed hopper by the screw pump (the bandwidth of the material can be adjusted) when the belt juicer is working (the materials are distributed uniformly).
In the downward-wedge wedge-shaped zone, a large amount of water is slowly pressed out to form a squeezable filter cake. In the squeezing zone, a pressing roller with an “L” shaped bar presses out the water, and Make sure that the water overflows quickly from both sides. The diameter of the pressure roller after the belt juicer is decreasing, and the filter belt is "S" shaped, which generates a decreasing surface pressure shear force, which ensures the best dehydration effect. In order to further improve the dehydration rate, add another one to produce linear Pressure roller with pressure and peripheral pressure. After dehydration, the filter cake is scraped off by the wear-resistant scraper.
Both filter belts of the belt juicer are continuously rinsed by high-pressure nozzles, so that the filter belt maintains a good high juice output. The spray washing water is automatically filtered, discharged and recycled by the arc filter through the reflux pump, saving energy. The pressure filter belt is made of nylon yarn with warp and weft. It has the characteristics of acid and alkali resistance, food hygiene, easy to juice, no water absorption, high strength and so on. The belt juice extractor adopts the airbag expansion pressure filter belt and the special valve control belt to deflect when working, which is not only stable but also avoids overload, safe and reliable, and realizes the entire process automation.