Food mixers move for a long time, and daily maintenance is essential. What if the auxiliary support position of some food mixers is not very convenient for maintenance?
We take food mixer as an example. In the structure of commonly used food mixers, the "bearing" is the part that links the agitator and the reduction motor, and its position is above the mixing tank. In order to ensure the normal operation of the equipment, the bearing must be lubricated and generally sealed. With good performance, the lubricant in the lubricant will not leak. If the sealing effect is not good or due to long-term operation, the lubricant leakage of the bearing seal wear will cause the leaked lubricant to enter the stirring directly. Contaminated mixing materials in the tank.
To solve this problem, you can use the following two methods: 1. When the mixing shaft is not long and the length is less than 1 meter, the bearing configuration can be canceled, so the bearing lubricant can effectively prevent the lubricant from penetrating into the mixing tank and contaminating the material in the tank. The problem. The following AAF vertical mixer is designed based on the special requirements of pollution-free for customers in Shanghai who require the materials in the mixing tank to strictly avoid lubricant pollution. 2. When the bearing configuration must be used, a cap can be set on the mixing shaft, and a convex water retaining device is provided in conjunction with the top of the mixing tank, which can effectively avoid the problem of oil leakage into the mixing tank after long-term use.
ENGLISH
简体中文
